Install notes and evidence

EVO source wording says: The front arms mount tucked up inside nearly flush with the bottom of the frame mounting inches above the stock front lower mounting bracket.. Treat this as a suspension-system install. Verify lift height, stage/options, shock choice, control arms, track bars, driveshaft/brake-line needs, bump stops, wheel and tire plan, and JL/JT/JK fitment before checkout.

Product-specific install PDFs or videos are not captured for this record yet. Treat this as a source gap before quote, checkout, or labor planning.

Suspension & liftsSource-captured candidateProduct image available

EVO Manufacturing

3.5 INCH LIFT GAS HIGH CLEARANCE LONG ARM JEEP WRANGLER JLU SUSPENSION SYSTEM (4 DOOR ONLY)

Vendor fitment: 2020-2028 JL Wrangler. Suspension & lifts fitment from the vendor source. Confirm final options and fitment on the vendor page before purchase.

JEEP WRANGLER JLU ( GAS ) 3.5 INCH LIFT HIGH CLEARANCE LONG ARM SUSPENSION SYSTEM ( 4 DOOR ONLY ) The EVO MFG 3.5” JLU High Clearance Long Arm kit will lift your JLU 3.5”s. Through specifically designed bracketry we accomplish the ultimate in suspension and chassis clearance, larger wheel travel ability, optimal suspension geometry with increased ride quality. Clearance, ride quality, performance and ease of installation was our focus in creating this long arm suspension system. The front arms mount tucked up inside nearly flush with the bottom of the frame mounting inches above the stock front lower mounting bracket. The rear mounting locations for the long arm are on the side of the frame, above the bottom giving inches of clearance over the factory locations as well. Keeping optimal geometry while maintaining as much clearance was critical in the design of this system. In doing so,.

SKU

EVO-3016

Price

$4,080.82

Role

review candidate

Start build with this part Vendor/source

Ask Rig Builder about this product

Ask product-specific questions about fitment notes, install docs, and simple comparisons.

For full build planning, tire/lift/wheel combinations, or a recommendation path, use the main Ask Rig Builder advisor.Open Ask Rig Builder

Question

What lift height is this for?

Suspension lift height

This is a 2.5-3 inch lift-height family. Verify the exact engine, drive side, spring-capacity variant, and loaded vehicle weight before quoting because those choices can change final stance.

Sources

- EVO Manufacturing product page: https://evomfg.com/products/evo-manufacturing-3-5-inch-high-clearance-long-arm-suspension-system

- Source text: Verify lift height, stage/options, shock choice, control arms, track bars, driveshaft/brake-line needs, bump stops, wheel and tire plan, and JL/JT/JK fitment before checkout.

Fitment and build notes

Vendor catalog record promoted for browsing. Final fitment, install dependencies, and shopper selection still require review before checkout.

For a lift, the last check is the complete Jeep setup: exact year/model/trim, doors, engine, lift variant, target tire size, wheel width and offset/backspacing, bump stops, flare/fender clearance, gearing, spare support, added bumper/cargo weight, and whether a shop is installing it.

Readiness

Fitment statusBuilt from a manufacturer product record, but still needs exact vehicle setup, install evidence, dependencies, and selected variant review before purchase or quote.Source-captured candidate

Evidence levelThe manufacturer product page is captured. Product-specific install PDFs, dependency mapping, owner/shop evidence, and final approval may still be missing.Manufacturer page captured

Install docsNo product-specific install PDF, install support link, or official video is captured for this record yet.Source needed

Product imageProduct image available

Purchase pathUse for build planning or a shop quote

Visual prioritymedium

Source-backed facts

Fact summary

Models: JL Wrangler; Years: 2020-2028; Source: evomfg.com; Captured: 2026-04-27