Install notes and evidence

AEV estimated install time: 1 Hour. Use the manufacturer guide and verify vehicle configuration before quoting.

AEV Stamped Geometry Correction Brackets Installation GuideManufacturer PDF captured from the AEV product page.AEV JL/JT Geometry Correction Brackets Installation GuideManufacturer PDF captured from the AEV install guide index.

Suspension & liftsNeeds vehicle setup checkProduct image available

AEV

AEV Stamped Geometry Correction Brackets for JL Wrangler and JT Gladiator

Vendor fitment: 2018-2026 JL Wrangler, JT Gladiator. Suspension & lifts with 2.5 in lift-height data from the vendor source. Confirm final options and fitment on the vendor page before purchase.

After pioneering Geometry Correction Brackets back in 2010, AEV has raised the bar again with the industry's first Stamped Geometry Correction Brackets. Designed to correct the front-end control arm geometry on vehicles with 2-4.5" of suspension lift, the AEV Jeep Wrangler & Gladiator stamped geometry correction brackets improve ride quality by eliminating front axle 'precession' caused by uncorrected suspension lift geometry. The corrected motion allows the front tires to move up and rearward (as they did on the stock vehicle) in response to a bump rather than trying to 'lunge' over it. Additionally, they dramatically reduce front-end 'dive' during hard braking by relocating the 'virtual.

SKU

NJL20500AB

Price

$329

Role

review candidate

Start build with this part Vendor/source

Ask Rig Builder about this product

Ask product-specific questions about fitment notes, install docs, and simple comparisons.

For full build planning, tire/lift/wheel combinations, or a recommendation path, use the main Ask Rig Builder advisor.Open Ask Rig Builder

Question

What lift height is this for?

Suspension lift height

This is a 2.5-3 inch lift-height family. Verify the exact engine, drive side, spring-capacity variant, and loaded vehicle weight before quoting because those choices can change final stance.

Sources

- AEV product page: https://aev-conversions.com/products/jl-geometry-correction-brackets

- Manufacturer instruction: AEV Stamped Geometry Correction Brackets Installation Guide

- Manufacturer instruction: AEV JL/JT Geometry Correction Brackets Installation Guide

- Source text: Models: JL Wrangler, JT Gladiator; Years: 2018-2026; Lift height: 2.5 in; Source: manufacturer_website; Captured: 2026-04-26 After pioneering Geometry Correction Brackets back in 2010, AEV has raised the bar again with the industry's first Stamped Geometry Correction Brackets.

Fitment and build notes

Vendor catalog record promoted for browsing. Final fitment, install dependencies, and shopper selection still require review before checkout.

For a lift, the last check is the complete Jeep setup: exact year/model/trim, doors, engine, lift variant, target tire size, wheel width and offset/backspacing, bump stops, flare/fender clearance, gearing, spare support, added bumper/cargo weight, and whether a shop is installing it.

Readiness

Fitment statusUseful for a shortlist, but exact vehicle setup, dependencies, or purchase path still need review.Needs vehicle setup check

Evidence levelNeeds source collection and claim-level review before it should be treated as recommendation-ready.Evidence review needed

Install docsProduct-specific install/support links are captured. Confirm exact SKU/application before final approval.Captured

Product imageProduct image available

Purchase pathUse for build planning or a shop quote

Visual prioritymedium

Source-backed facts

Fact summary

Models: JL Wrangler, JT Gladiator; Years: 2018-2026; Lift height: 2.5 in; Source: manufacturer_website; Captured: 2026-04-26