Install notes and evidence

AEV estimated install time: 2 Hours. Use the manufacturer guide and verify vehicle configuration before quoting.

AEV XP8100 Shocks Installation Guide for Jeep Wrangler JL and JT Gladiator Installation GuideManufacturer PDF captured from the AEV product page.AEV JL/JT XP8100 Reservoir Shocks Installation GuideManufacturer PDF captured from the AEV install guide index.

Suspension & liftsNeeds vehicle setup checkProduct image available

AEV

AEV / Bilstein XP8100 Reservoir Shocks for JT Gladiator

Vendor fitment: 2020-2026 JT Gladiator. Suspension & lifts with 3 in lift-height data from the vendor source. Confirm final options and fitment on the vendor page before purchase.

AEV/Bilstein XP8100 Reservoir Shocks are a high-performance, direct-fit upgrade for your lifted Jeep Gladiator. This upgrade will provide increased dampening performance and consistency over our standard 5100 shocks, especially on heavier vehicles that travel at higher speeds over rough terrain. These AEV/Bilstein XP8100 reservoir shocks are constructed from aerospace-quality billet components and tuned by AEV to work in perfect harmony with your outfitted Jeep Gladiator. When we tune shocks, we use the same target weight as one of our turn-key conversions to ensure that you get the absolute best possible ride quality and handling, without the degradation in performance, commonly associated.

SKU

NJT22400AA

Price

$2,194

Role

review candidate

Start build with this part Vendor/source

Ask Rig Builder about this product

Ask product-specific questions about fitment notes, install docs, and simple comparisons.

For full build planning, tire/lift/wheel combinations, or a recommendation path, use the main Ask Rig Builder advisor.Open Ask Rig Builder

Question

What lift height is this for?

Suspension lift height

This is a 2.5-3 inch lift-height family. Verify the exact engine, drive side, spring-capacity variant, and loaded vehicle weight before quoting because those choices can change final stance.

Sources

- AEV product page: https://aev-conversions.com/products/xp8100-reservoir-shocks-gladiator-jt

- Manufacturer instruction: AEV XP8100 Shocks Installation Guide for Jeep Wrangler JL and JT Gladiator Installation Guide

- Manufacturer instruction: AEV JL/JT XP8100 Reservoir Shocks Installation Guide

- Source text: Suspension & lifts with 3 in lift-height data from the vendor source.

Fitment and build notes

Vendor catalog record promoted for browsing. Final fitment, install dependencies, and shopper selection still require review before checkout.

For a lift, the last check is the complete Jeep setup: exact year/model/trim, doors, engine, lift variant, target tire size, wheel width and offset/backspacing, bump stops, flare/fender clearance, gearing, spare support, added bumper/cargo weight, and whether a shop is installing it.

Readiness

Fitment statusUseful for a shortlist, but exact vehicle setup, dependencies, or purchase path still need review.Needs vehicle setup check

Evidence levelNeeds source collection and claim-level review before it should be treated as recommendation-ready.Evidence review needed

Install docsProduct-specific install/support links are captured. Confirm exact SKU/application before final approval.Captured

Product imageProduct image available

Purchase pathUse for build planning or a shop quote

Visual prioritymedium

Source-backed facts

Fact summary

Models: JT Gladiator; Years: 2020-2026; Lift height: 3 in; Source: manufacturer_website; Captured: 2026-04-25