Install notes and evidence

Synergy Manufacturing source wording says: Features: Synergy JK Weld-On Rear Track-Bar Bracket Weld-On rear track-bar bracket designed to replace the weak factory JK track bar bracket Replace the thin factory brackets on a stock axle or use for swapping any axle into a JK Multiple Track-bar holes for suspension adjustments Designed to fit stock JK axle tubes, 3.150" diameter Will fit other diameter axle tubes with minor trimming Track bar relocation bolt holes are 2.900", 3.713", and 4.525" above the stock track bar mounting location.. Verify JK/JL/JT application, axle/trim, tie-rod or drag-link setup, stabilizer/mount path, alignment, and any required brackets before checkout.

Product-specific install PDFs or videos are not captured for this record yet. Treat this as a source gap before quote, checkout, or labor planning.

Suspension & liftsNeeds vehicle setup checkProduct image available

Synergy Manufacturing

Synergy Jeep JK Weld-On Rear Track Bar Bracket

Vendor fitment: 2007-2018 JK Wrangler. Suspension & lifts fitment from the vendor source. Confirm final options and fitment on the vendor page before purchase.

Features: Synergy JK Weld-On Rear Track-Bar Bracket Weld-On rear track-bar bracket designed to replace the weak factory JK track bar bracket Replace the thin factory brackets on a stock axle or use for swapping any axle into a JK Multiple Track-bar holes for suspension adjustments Designed to fit stock JK axle tubes, 3.150" diameter Will fit other diameter axle tubes with minor trimming Track bar relocation bolt holes are 2.900", 3.713", and 4.525" above the stock track bar mounting location. Note: Requires the use of a minimum 3" bump stop spacer Note: This bracket requires the use of a minimum 3" rear bump stop spacer for clearance with the exhaust. When using a lower relocation bolt ho...

SKU

8072-01

Price

$140

Role

review candidate

Start build with this part Vendor/source

Ask Rig Builder about this product

Ask product-specific questions about fitment notes, install docs, and simple comparisons.

For full build planning, tire/lift/wheel combinations, or a recommendation path, use the main Ask Rig Builder advisor.Open Ask Rig Builder

Question

What lift height is this for?

Suspension lift height

We don't have that info yet.

Sources

- Synergy Manufacturing product page: https://www.synergymfg.com/jeep/jeep-jk/axles--drivetrain/synergy-jeep-jk-weld-on-rear-track-bar-bracket.html

Fitment and build notes

Vendor catalog record promoted for browsing. Final fitment, install dependencies, and shopper selection still require review before checkout.

For a lift, the last check is the complete Jeep setup: exact year/model/trim, doors, engine, lift variant, target tire size, wheel width and offset/backspacing, bump stops, flare/fender clearance, gearing, spare support, added bumper/cargo weight, and whether a shop is installing it.

Readiness

Fitment statusUseful for a shortlist, but exact vehicle setup, dependencies, or purchase path still need review.Needs vehicle setup check

Evidence levelNeeds source collection and claim-level review before it should be treated as recommendation-ready.Evidence review needed

Install docsNo product-specific install PDF, install support link, or official video is captured for this record yet.Source needed

Product imageProduct image available

Purchase pathUse for build planning or a shop quote

Visual prioritymedium

Source-backed facts

Fact summary

Models: JK Wrangler; Years: 2007-2018; Source: xcart_html; Captured: 2026-05-12