Install notes and evidence

Clayton source wording says: JK drive shaft rebuild kits just don't cut it. Verify engine, transfer case, fuel tank, crossmember, transmission, and 2-door/4-door/platform details before quoting. Armor and skid systems often require matching brackets or adjacent skid sections.

Product-specific install PDFs or videos are not captured for this record yet. Treat this as a source gap before quote, checkout, or labor planning.

DrivelineNeeds vehicle setup checkProduct image available

Clayton Off Road

Jeep Wrangler JK - Rear 1310 CV Driveshaft - 2012-2018 2DR

Vendor fitment: 2012-2018 JK Wrangler. Driveline with 1 inch lift-height data from the vendor source. Confirm final options and fitment on the vendor page before purchase.

2-Door JK Rear Drive Shaft, 1310 Series Jeep JK drive shaft noise. . . it is a common problem and is inevitable on nearly all lifted Jeep JK Wranglers. It comes down to the design. The stock drive shafts use Rzeppa CV joints that were designed only to work in stock Jeeps. Two or three inches of lift is enough to cause these CV joints to fail (watch the video below). JK drive shaft rebuild kits just don't cut it. That is why almost all JK drive shaft replacements are upgraded to a double cardan design (a double cardan is also commonly called a cv). This shaft will handle the angles that your stock drive shaft can not. The double cardan drive shaft is a time tested design that has proven.

SKU

TWD-08-2R1310-1216

Price

$644

Role

review candidate

Start build with this part Vendor/source

Ask Rig Builder about this product

Ask product-specific questions about fitment notes, install docs, and simple comparisons.

For full build planning, tire/lift/wheel combinations, or a recommendation path, use the main Ask Rig Builder advisor.Open Ask Rig Builder

Question

What lift height is this for?

Suspension lift height

This is a 2.5-3 inch lift-height family. Verify the exact engine, drive side, spring-capacity variant, and loaded vehicle weight before quoting because those choices can change final stance.

Sources

- Clayton Off Road product page: https://claytonoffroad.com/products/jeep-wrangler-jk-rear-1310-cv-driveshaft-2012-2018-2dr

- Source text: Models: JK Wrangler; Years: 2012-2018; Lift height: 1 inch; Source: scrape; Captured: 2026-05-06 2-Door JK Rear Drive Shaft, 1310 Series Jeep JK drive shaft noise.

Fitment and build notes

Vendor catalog record promoted for browsing. Final fitment, install dependencies, and shopper selection still require review before checkout.

For a lift, the last check is the complete Jeep setup: exact year/model/trim, doors, engine, lift variant, target tire size, wheel width and offset/backspacing, bump stops, flare/fender clearance, gearing, spare support, added bumper/cargo weight, and whether a shop is installing it.

Readiness

Fitment statusUseful for a shortlist, but exact vehicle setup, dependencies, or purchase path still need review.Needs vehicle setup check

Evidence levelNeeds source collection and claim-level review before it should be treated as recommendation-ready.Evidence review needed

Install docsNo product-specific install PDF, install support link, or official video is captured for this record yet.Source needed

Product imageProduct image available

Purchase pathUse for build planning or a shop quote

Visual prioritymedium

Source-backed facts

Fact summary

Models: JK Wrangler; Years: 2012-2018; Lift height: 1 inch; Source: scrape; Captured: 2026-05-06